Housings

CHSM2510 - Camera Housing 300 mm, IP66, 1 x M12, 1 x M16, 1 x M20

    Material of the housing cover: corrosion-resistant aluminum

    Material of the sun shield: anti-reflecting polymer (ABS)

    Material of front and end caps: polycarbonate

    Integrated heater to prevent condensation on the pane

    Space-efficient integration of power supply units

    Simple installation of a twisted pair transmitter

    IP66 with the use of the metric screwed cable glands provided

    Concealed cable with the use of the CHBC2010

The all-purpose protective aluminum camera housing with sun shield and integrated heating is of the Siemens design. All current Siemens cameras with Siemens fixed or vario lenses fit in this housing.

The protective housing is suited for permanent mounting with the available wall arms or for direct mounting on a pan-tilt head.

The housing cover is easy to remove, facilitating on-site installation and cabling of the camera with lens. Space is provided in the housing for installation of a twisted pair transmitter.

The power supplies for cameras and accessories can be installed in the back of the housing to save space.

CHSL2610 - Camera Housing 320 mm, IP66, 1 x M12, 1 x M16, 1 x M20

    Die-cast corrosion-resistant aluminum housing

    Siemens corporate design

    Integrated heater to prevent condensation on the pane

    Space-efficient integration of power supply units

    Simple installation of a twisted pair transmitter or fiber optic module

    IP66 with the use of the metric screwed cable glands provided

    Concealed cable with the use of the CHBC2010 wall arm

The all-purpose protective aluminum camera housing with sun shield and integrated heating is of the Siemens design. All current Siemens cameras with Siemens fixed, vario or zoom lenses fit in this housing.

The protective housing is suited for permanent mounting with the available wall arms or for direct mounting on a pan and tilt head. The housing cover is easy to remove, facilitating on-site installation and cabling of the camera with lens. Space is provided in the housing for installation of a twisted pair transmitter or fiber optic module.

The power supplies for cameras and accessories can be installed in the back of the housing to save space.

CHSL4010 - Large Camera Housing‚ 110 - 230 V AC

    ps_es_vs_hous_CHSM2210_CHSM2211Washer/wiper unit available as an option

    Integrated heater to prevent condensation on the front window

    Protection rating IP66 for outdoor use

    Siemens corporate design

The multi-purpose protective camera housing in Siemens design is made of aluminium and equipped with a sunshield and integrated heater. The housing can accommodate all current Siemens cameras with fixed focus, varifocal or zoom lenses.

The protective housing can either be fixedly installed using one of the available wall brackets or mounted on a pan-and-tilt head. The housing cover is easy to remove, facilitating on-site installation and cabling of the camera with lens.

CHSL4011 - Large Camera Housing‚ 12 - 24 V AC

   

ps_es_vs_hous_CHSM2210_CHSM2211

Washer/wiper unit available as an option

    Integrated heater to prevent condensation on the front window

    Protection rating IP66 for outdoor use

    Siemens corporate design

The multi-purpose protective camera housing in Siemens design is made of aluminium and equipped with a sunshield and integrated heater. The housing can accommodate all current Siemens cameras with fixed focus, varifocal or zoom lenses.

The protective housing can either be fixedly installed using one of the available wall brackets or mounted on a pan-and-tilt head. The housing cover is easy to remove, facilitating on-site installation and cabling of the camera with lens.

CHSM2210 - Medium Camera Housing‚ 110 - 230 V AC

    ps_es_vs_hous_CHSM2210_CHSM2211Integrated heater to prevent condensation on the front window

    Protection rating IP66 for outdoor use

    Siemens corporate design

The multi-purpose protective camera housing in Siemens design is made of aluminium and equipped with a sunshield and integrated heater. It can accommodate all current Siemens cameras with fixed focus or varifocal lenses.

The protective housing can either be fixedly installed using one of the available wall brackets or mounted on a pan-and-tilt head. The housing cover is easy to remove, facilitating on-site installation and cabling of the camera with lens.

CHSM2210-B - Medium Camera Housing, Integral Bracket‚ 110 - 230 V AC

   ps_es_vs_hous_CHSM2210-B_CHSM2211-B Integrated bracket with internal cable channel

    For wall mounting; ceiling mount bracket available as an option

    Integrated heater to prevent condensation on the front window

    Protection rating IP66 for outdoor use

    Siemens corporate design

The multi-purpose protective camera housing in Siemens design is made of aluminium and equipped with a sunshield and integrated heater. It can accommodate all current Siemens cameras with fixed focus or varifocal lenses.

The housing has an integrated mounting bracket allowing the cables to be run inside. It is designed for wall mounting; a ceiling mount bracket is available as an option. The housing cover is easy to remove, facilitating on-site installation and cabling of the camera with lens.

CHSM2211-B - Medium Camera Housing, Integral Bracket‚ 12 - 24 V AC

    ps_es_vs_hous_CHSM2210-B_CHSM2211-BIntegrated bracket with internal cable channel

    For wall mounting; ceiling mount bracket available as an option

    Integrated heater to prevent condensation on the front window

    Protection rating IP66 for outdoor use

    Siemens corporate design

The multi-purpose protective camera housing in Siemens design is made of aluminium and equipped with a sunshield and integrated heater. It can accommodate all current Siemens cameras with fixed focus or varifocal lenses.

The housing has an integrated mounting bracket allowing the cables to be run inside. It is designed for wall mounting; a ceiling mount bracket is available as an option. The housing cover is easy to remove, facilitating on-site installation and cabling of the camera with lens.

CAHL4011-WK - Wiper Kit for CHSL4011 Camera Housing‚ 24 V AC

ps_es_vs_hous_CAHL4010-WKThis kit is supplied as a means to add a wiper to the CHSL4011 camera housings.

 

 

 

 

 

 

 

       

CAHL4010-WK - Wiper Kit for CHSL4010 Camera Housing‚ 230 V AC

ps_es_vs_hous_CAHL4010-WKThis kit is supplied as a means to add a wiper to the CHSL4011 camera housings.

 

 

 

 

 

 

 

 

 CAHL4010-WU - Washer Unit

    ps_es_vs_hous_CAHL4011-WUEfficient cleaning of the camera housing window

    Washer unit can be operated by remote control

    5 litres container

Dirt build-up on a camera housing window reduces the performance of the camera and is not always easy to remove. Cameras are often installed such that the housings are not easily accessible. The washer unit CAHL401x-WU enables easy and efficient cleaning.

The washer unit has been designed to operate with any Siemens camera housing oftypes CHSL4010 and CHSL4011 with fitted wiper. It assists in keeping the camera housing window clean. The operation of the washer can be controlled from a control unit. A self-resetting TOC is incorporated to prevent over heating.

 

 

 CAHL4011-WU - Washer Unit

    ps_es_vs_hous_CAHL4011-WUEfficient cleaning of the camera housing window

    Washer unit can be operated by remote control

    5 litres container

Dirt build-up on a camera housing window reduces the performance of the camera and is not always easy to remove. Cameras are often installed such that the housings are not easily accessible. The washer unit CAHL401x-WU enables easy and efficient cleaning.

The washer unit has been designed to operate with any Siemens camera housing oftypes CHSL4010 and CHSL4011 with fitted wiper. It assists in keeping the camera housing window clean. The operation of the washer can be controlled from a control unit. A self-resetting TOC is incorporated to prevent over heating.

CHBC2020 - Cable Management Bracket for CHSL2610/CHSM2510

    ps_es_video_hous_mounts_CHBC2010_144x202Suitable for in- and outdoor use

    Wall bracketsCeiling brackets

    Mounting blocks

    Pole mounts

    Pedestal mount

    Camera power supplies

    Mains distributor

    Two-wire transmitter

    Replacement heaters

A range of Siemens camera housings come with a full range of accessories, brackets and spare parts tailored to the customer’s need. All of these items adhere to high quality and reliability standards to support a safe and easy installation.

 CHBS2815 - Wall Swivel Bracket

ps_es_vs_hous_CHBS2815Fits onto the CHSL401x and CHSM221x housings. This bracket utilises the extrusion features of the housing to provide a slide and lock mounting to the bracket.

 

 

 

 

 

 

 

 

 CDBC0075 Corner Bracket

ps_es_vs_hous_CDBC0075A corner mount adaptor which allows the fixed brackets to be mounted on the corner of buildings. The design of the adaptor spreads the load over a large area. A typical bracket which can be mounted to this adaptor is e.g. the CDBS4540. The unobtrusive and simple design allows the simple and effective installation of CCTV equipment on the corner of buildings. Corner mounting allows an excellent view point to be achieved from a CCTV installation.

 

 

 

 

 

 

 CHBA221x-B Ceiling Mount Bracket

ps_es_vs_hous_CHBA221X-BA ceiling mount bracket casting which can be used with theCHSM2210-B and CHSM2211-B housings. The casting replaces thestandard casting and is bought as an after market add-on. The bracketis suitable for indoor and outdoor use.

 

 

 

 

 

 

 

 CAHL401x-W - Spare Wiper Arm

Spare wiper arm assembly for a CAHL4010-WK and CAHL4011-WK wiper kit. Wiper kits are available as an accessory for CHSL4010 and CHSL4011 camera housings.

 

 

 

 

 

 

 

 CDBS4540 - Fixed Bracket

ps_vs_es_video_CDBS4540A medium-weight bracket for mounting medium-weight pan/tiltsand/or housings with 4" PCD mounting holes to a wall or other surface.

 

 

 

 

 

 

 

  

 CAHA1040 - Swivel Mount Adaptor

ps_vs_es_video_CAHA1040A swivel mount that can be used in conjunction with a standard 4" PCD mount bracket. This adaptor allows the housing to be pointed in the required direction by means of a movable pivot and rotation.

 

 

 

 

 

 

  

 CADC3099 - Column Spacer with 4" PCD

ps_es_vs_hous_CADC1599Column spacers can be used in a number of situations to raise or lower the height of a housing or pan/tilt.