SI Series Intrusion Panels

SI_series_SI1xx-SI2xx_familSI Series Intrusion PanelsUtmost security, day-in, day-out.

The Intrunet™ SI series control systems are ideal for organisations looking to invest wisely in security. Modular and scalable, they form the heart of easy-to-operate, adaptable intrusion detection systems. Easy to install and to use, wired or wireless, the family of Intrunet SI series control units uses a common programming software and can be configured to fit individual needs. A complete range of high performance motion detectors offering the latest in intelligent signal analysis also combine to deliver early and reliable detection and reduced false alarms. And with remote programming and activation, the maintenance of the control units is equally easy…for all round high performance and flexible security from Siemens.

- Future proof and scalable security
- Superior detection reliability and false alarm immunity
- Sophisticated alarm verification
- Versatile alarm transmission paths
- High system integration capability
- Multifunctional intrusion control systems
- Modular design
- Extensive assortment of functional modules
- User friendly operation with card reader
- Flexible configuration

Simple installation
Input/output modules, power units and remote keypads are connected to the central control unit via the E-Bus. Consistent use of the Bus technology yields many advantages, including reduced labour outlay, ultra-simple system planning and lower installation costs.

Ease of configuration and maintenance
The Sylcom® Software can be used for configuration and maintenance of the Intrunet SI series control panels. The systems can be accessed locally or via analogue and IP networks. Sylcom can also be configured as an un-operated parameter server, which the control panel can remotely access to compare the parameters for optimum system data management.

Flexible alarm transmission and verification
Various standard protocols are supported to connect the system to an Alarm Receiving Centre. A comprehensive range of add-on products is available to allow alarm verification by a receiving centre, via audio or video. Detectors can be linked to defined verification zones so that the relevant module (e.g. audio, video) can be activated immediately following the alarm. With the SI series systems, alarms can be further qualified through filtering or the use of additional verification devices, such as listen-in/speak-out devices.

Fail-safe design
The battery, mains and fuses are continuously monitored and failures are reported to the main board via the E-Bus.

ps_es_intr_pnls_hi_SI220_144SI120 - made-to-measure security for small to medium applications


- Communication via PSTN or ISDN telephone network, IP or GSM (GPRS)
- 2+1 partitions which can be combined
- 6 - 22 individually programmable inputs
- 5 - 23 individually programmable outputs
- Up to 19 freely definable users
- 2 calendars for partition setting
- Various different alarm verification methods
- Remote configuration and maintenance using Sylcom® software
- Integration capability for wireless system


The Intrunet™ SI120 intrusion control system offers private households and small to medium size businesses the flexibility of adaptable security and high performance intrusio

 
 
ps_es_intr_pnls_hi_SI220_144SI220 - the right security choice for medium to large applications


- Communication via PSTN or ISDN telephone network, IP or GSM (GPRS)
- 6 partitions which can be combined
- 8 - 48 individually programmable inputs
- 8 - 49 individually programmable outputs
- Up to 49 freely definable users
- 8 calendars on weekly time base
- Various different alarm verification methods
- Remote configuration and maintenance using Sylcom® software
- Integration capability for wireless system

The Intrunet™ SI220 intrusion control system offers medium sized businesses the flexibility of adaptable security and high performance intrusion detection. Easy to install and to use, wired or wireless, the panel uses a programming software which is common to the whole range of SI series panels, and can be configured to fit individual needs.

 
 

ps_es_intr_pnls_hi_SI220_144SI410 - sophisticated security with a "plus" for large to enterprise applications

- Communication via PSTN or ISDN telephone networks, IP or GSM(GPRS)
- 16 partitions which can be combined as needed
- 20 calendars which are programmable two years in advance
- 16 - 464 individually programmable inputs
- 11 - 154 individually programmable outputs
- 497 definable movement corridors
- Various different alarm verification methods
- Remote configuration and maintenance using Sylcom® software
- Macro programming for enhanced functions
- Integration of wireless systems

Combined with the wide range of Siemens detectors, sensors, audio or video components, SI410 delivers feature rich and fail-safe security, to protect people, assets and property in the long term. Clever alarm verification processes ensure a high detection accuracy and unparalleled false alarm immunity.

Versatile alarm transmission methods, as well as integration capability with Danger Management Stations, CCTV and Access Control systems allow for easy system expansion and functional integration. And with IP ready communications, Intrunet SI410 enables remote maintenance and alarm status verification, for cost-effective monitoring and speed of intervention.

Increased user-friendly operation

The range of Intrunet LCD keypads supports the Intrunet SI series systems through additional functionality. Combinations of keypads with card reader, speaker and microphone or flaps are available, and all have plain text display to support the easy operation. Language packages are also available to allow local customisation.

ps_es_intr_pnls_kpd_SAK94_1Intrunet SAK84 - keypad with card reader and audio

The SAK84 is equipped with a proximity card reader (125kHz) for easy user access‚ speaker/microphone for alarm verification‚ soft keys and large graphical LCD for easy operation. The functionality can been hanced with the add-on module SAK9S1 (key switch module).

 

 

 

 

 

ps_es_intr_pnls_kpd_SAK94_1Intrunet SAK94 - Multi-partition keypad with large graphical display


The  SAK94 with integrated card reader offers a state of the art user interface and is optimised to operate multi-partition applications. The integrated proximity card reader (125Hz) enables easy user access. the keypad also features a built-in speaker/microphone for alarm verification, soft keys and a large graphical LCD display for ease of operation. Up to 16 partitions (depending on the control unit type and software version) can easily be managed, with 4 partitions permanently displayed. As standard, the SAK94 keypad supports the functional enhancements offered by the add-on modules SAK9S1 (key switch module) and SAK9L1 (annunciation module with function keys).

 

 

ps_es_intr_pnls_kpd_SAK9L1_ Intrunet SAK9L1 - Universal annunciation module for SAK94

Can be used in linked mode to provide parallel indication and operation of the partitions. Standalone operation also possible for maximum flexibility of installation and use.

 

 

 

 

 

ps_es_intr_pnls_kpd_SAK9S1_Intrunet SAK9S1 - Universal key switch module for SAK94

The universal key switch module is used to release access to SAK94 or SAK9L1. Standalone operation also possible for maximum flexibility of installation and use. 

 

 

 

 

 

ps_es_intr_pnls_kpd_SAK52_144Intrunet SAK52 -2-line display keypad with audio function

The SAK52 is identical to the SAK51. The added audio function (microphone and loudspeaker) supports applications such as alarm verification and remote help.

 

 

 

 

 

ps_es_intr_pnls_kpd_SAK53_144Intrunet SAK53 - 2-line extra large display keypad with removable cover

The SAK53 is equipped with a removable cover and an extra-large 2-line display, each consisting of 16 characters. The display and the keys are fitted with backlights. The 5 LEDs display the most important system states such as on/off, partition “unset”, “part set”, “full set”, alarm, etc.

 

 

 

 

Overview

The E-Bus components can be used to provide an interface to card readers, or to increase the number of conventional inputs in the Intrunet SI410 system. Bus isolator and repeater devices enable the incoming E-Bus to be split into 2 galvanic isolated branches, this refreshes the signals over longer distances. Addressable input / output expander devices are used to  connect conventional contacts, detectors or switching devices. The panel feeds, controls and monitors the modules via the E-Bus.

ps_es_intr_pnls_acc_eb_SMG71_144Intrunet SMG71 - Card reader E-Bus interface

The SMG71 is used to connect Wiegand readers to the SI410 control panel. It is possible to connect up to 2 card readers with Wiegand protocol to each module. Each module is equipped with 4 outputs and 2 inputs. Up to 32 SMG71 units can be connected to the Intrunet SI410. It is installed in the control panel housing, in the external power supply or in the optional universal housing unit SAH24.

 

 

 

 

ps_es_intr_pnls_acc_eb_SAG91_144Intrunet SAG91 - E-Bus expander gateway

The SAG91 can be used to increase the number of conventional inputs in the Intrunet SI410 control panel. A single system can manage 4 SAG91 units and each extension allows for connecting 20 SAT12 or SMT12 transponder modules  (See the "Optional modules" section for more information).

 

 

 

 

 

 

IEGW6-12Intrunet IEGW6-12 - SiWay/Si2Way E-Bus gateway

All Intrunet wireless devices and peripherals can be used with SI series panels‚ thanks to the IEGW6-12 SiWay/Si2Way E-Bus gateway.
This small and discreet gateway can be connected to the panel's field bus (EBus); one gateway can support up to 12 wireless detectors/actuators(with a maximum of 2 actuators)‚ plus up to 7 remote controls. The maximum numer of gateways per system is panel-dependant:
- max. 1 gateway per SI120 system
- max. 3 gateways per SI220 system
- max. 4 gateways per SI410/420 system

 The IEGW6-12 comes in a standard tamper-protected SAT12 box. It is powered directly from the E-Bus‚ and offers advanced wireless features such as 'Radio Signal Strength Indication'‚ and 'Jamming Detection' for enhanced communication reliablility.

 

 
ps_es_intr_pnls_acc_om_SAR11_144Intrunet SAR11 - E-Bus repeater / isolator

The SAR11 can be used to divide the incoming E-Bus into two independent, electrically separated supplied partitions. In addition to this, the E-Bus signals can be received over large distances with this module. 

 

 

 

 

 

 
ps_es_intr_pnls_acc_om_SMR11_144Intrunet SMR11 - E-Bus repeater / isolator (board only)

This module is identical to the SAR11, but without the housing. It is installed directly in the control panel, in the external power supply or in the optional universal housing unit SAH24.

 

 

 

 

 

ps_es_intr_pnls_acc_om_SAT12_144Intrunet SAT12 - 4 inputs / 2 outputs transponder

SI series control panel extension by 4 programmable inputs and 2 outputs via the E-Bus. 2 of these inputs can be used to connect glass break detectors.

 

 

 

 

 

ps_es_intr_pnls_acc_om_SMT12_144Intrunet SMT12 - 4 inputs / 2 outputs transponder (board only)

This unit is identical in function to the SAT12, but without the housing. It is installed directly in the control panel, in the external supply or in the optional universal housing unit SAH24.