Single Door Products

ps_es_ac_single_codo_cd3500_144x202CD3500 Codoor codelock - Scandinavian lock case standard

CD3500 is a battery-powered codelock that fits directly on an interior door. The programming of codes is carried out directly via the keypad. It is possible to manually change the settings to leave the door unlocked if necessary. The batteries used are standard alkaline or lithium cells. 

The CD3500 is suitable for lock cases with a distance of between 105 mm and 116 mm between the center of the door handle and the center of the lock cylinder. It is designed to fit a Scandinavian lock case.

 

 

 

ps_es_ac_single_codo_cd4000_144x202

CD4000 - Codoor codelock - European lock case standard

CD4000 is a battery-powered codelock that fits directly on an interior door. The programming of codes is carried out directly via the keypad. It is possible to manually change the settings to leave the door unlocked if necessary. The batteries used are standard alkaline or lithium cells. 

The CD4000 is suitable for lock cases with a distance of 72 mm between the center of the door handle and the center of the lock cylinder. It is designed for a European standard lock case, following the DIN 18251 standard.

 

 

 

 

RF30-EM_Wireless_Codoor_SDP_144x202RF30-EM - Wireless Codoor - Scandinavian lock case standard

RF30-EM is a Codoor unit that can be used either as a standalone product or as a wireless component in a SiPass Entro system. It contains a reader‚ keypad‚ controller‚ lock mechanism and power supply‚ all in a single housing. It is designed to be mounted directly on an interior door.

In standalone mode it is possible to store up to 250 cards and do admin- istration using the built-in keypad.

In system mode the RF30-EM is fully online and functions in the same way that the wired doors in the SiPass Entro system do. The wireless functionality operates on a 2.4 GHz license-free frequency band using the Zigbee protocol. The maximum distance between an RF30-EM and the SR35i controller is 25 meters. For distances greater than 25 meters the RF9 router is required (see the SiPass Entro section for more information about RF9.)

It is easy to set up RF30-EM as part of a SiPass Entro system by using the installation mode‚ which indicates the signal strength and reliability of the wireless network.

RF30-EM is suitable for lock cases with a distance of between 105 and116 mm between the center of the door handle and the center of the lock cylinder. It is designed for use with standard Scandinavian lock cases.

ps_es_ac_single_com_bc615_144x202BC615 Magnetic stripe card reader

BC615 is a compact magnetic stripe card reader for one door that is programmable from the keypad. It can also be used as part of a SiPass Entro system in conjunction with CR1. It can be mounted either indoors or outdoors and it has a built-in calender clock to make it easy to change security levels. Access registration and printing are possible. The keypad has a backround illumination. For flush mounting, use the BB4 flush mounting unit.

 

 

 

 


ps_es_ac_single_com_bc615_144x202BC615-.. Proximity card readers

These compact proximity card readers work using Cotag or EM4102 reading technology. They are programmable form the keypad and are intended for use on single doors. They can also be used as part of a SiPass Entro system in conjunction with CR1. The built-in calender clock makes it easy to change security levels. Access registration and printing are possible. The keypad has backround illumination. For flush mounting, use the BB4Prox flush mounting  unit.

 

 

 

 


K42 - Codelock with two codes

ps_es_ac_single_code_k12_144x202The K42 is the best-selling codelock in the world. It is compact and easy to use with a modern design that is suitable for either indoor or outdoor mounting. The K42 has a capacity of two four-digit codes. One can be used by residents while the other is used by the property caretaker, for example. All settings are made directly in the unit.

 

 

 

 

 

 
ps_es_ac_single_code_k12_144x202K44 Duo - Codelock with 30 codes

The K44 Duo is a programmable codelock for one or two doors. It is possible to set seperate codes for each door or the same code for both. K44 Duo also provides the option of door control and alarm output. All programming is done via the keypad. The K44 Duo has a code capacity of 20 four-digit codes and 10 six-digit codes. By using the K44 Duo's tamper switch in combination with the SK5 security unit, it is possible to achieve a higher level of security.

 

 

 

 

ps_es_ac_sd_DC800_144_202DC800 Door Controller

The DC800 is a powerful and highly secure door controller that can manage access rights for up to 1,000 cardholders. It offers a range of different reader options – card only, group code only, or card plus personal code. It can also be connected to readers on both sides of the door to control and track both entries and exits. Further, it includes a “door control” function – that is, an alarm is activated when the door is not properly closed or is forced open.

The DC800 is designed for split-mounting. A split-mounted solution separates the control device (i.e. the DC800) – which is mounted in a secure area inside the building – from the card reader that is installed outside the locked door. This protects the control device from vandalism attempts and ensures that the only people who are able to program the DC800 (add cardholders, change settings, etc.) are those who have access to the secure area inside the building.

The DC800 provides 10 time schedules that can control when various categories of cardholders are allowed access through the door - that is, cards can be programmed to provide access only at particular times of the day, if desired. It also includes an integrated calendar clock that enables the programming of different access settings for different times of the day or week, or for holidays.

Ease of programming is one of the major advantages of the DC800. It is programmable either via its built-in keypad or – if the user prefers – from a PC with SiPass Entro Lite software installed. In system mode, the DC800 can also store up to 1,000 events - valid entries, forced-entry attempts, communication disturbances, etc. – in its offline event log. (Note that a PC with the SiPass Entro Lite software installed is required to view and search the event log.)

It is very easy to upgrade from a DC800 single-door application to a multi-door system later, if desired, by using the SiPass Entro Lite software together with a USB-RIF/2 interface converter. It is also possible to upgrade directly to a SiPass Entro system, without any hardware redundancy.

AKS6311__ SiPass standalone kit
ps_eb_access_singel-door_standalone_kit_144x202Only two products are necessary for a SiPass standalone kit installation: one ARS6311-RX card reader and one ACS6311 IO-board. A SiPass standalone kit installation can also use two ARS6311-RX card readers (one at the entry, the other at the exit side of the door), enabling two-way access control. The maximum card capacity is 120.   

This kit does not have its own order nurmber; its components have to be ordered individually.

For order numbers and further technical details, see ARS6311-RX in the "Readers" section and ACS6311 in the "Accessories" section.