SiPass integrated

SiPass integrated - Tailor-made security systems for demanding organizations of any size

SiPass integrated is a powerful and almost infinitely flexible access control system that provides a very high level of security without compromising convenience and ease of use for system users. It is designed to meet access control needs that range in complexity from medium to very high. 

SiPass integrated can be used to manage access to anything from a single low-rise office or residential building with just a few doors to massive high-rise complexes with tens of thousands of doors, gates, barriers and elevators at multiple sites around the globe. It also fully supports the integration of video surveillance, intrusion detection and fire alarm systems – either Siemens’ own or third-party – thereby creating a total security solution.    

For applications that require full availability, it is possible to load the SiPass integrated software onto a Marathon everRun FT server. The result is an access control system that is completely immune to server failures.   

System highlights

  •     Virtually unlimited number of cardholders and controllers to suit any facility size
  •     Supports a broad range of readers – various technologies/manufacturers
  •     Intuitively designed software that is easy to use and administer
  •     Modular system architecture enables tailoring to suit the needs of any facility
  •     Operates in an existing IT environment using TCP/IP over WAN/LAN
  •     Advanced card management, multimedia alarm handling, video surveillance user interface and     complete event logging in a single system
  •     Support for offline components (doors)

ASL5000.. SiPass integrated software licenses

The SiPass integrated software is the heart of any SiPass integrated system. The total number of controllers that can be connected is virtually unlimited. The Windows-certified software has a powerful client/server architecture‚ and it is easy to install and administer via its graphical user interface.

Features such as advanced audit-trail logging‚ advanced alarm management‚ anti-passback functionality (including global and workgroup anti-passback)‚ door interlocking‚ escort control mode‚ video surveillance and DVR interfaces - as well as Siemens’ exclusive custom Wiegand functionality and advanced device firmware download - are all standard in SiPass integrated. A wide variety of other advanced features are also available as add-on options. SiPass integrated also offers the possibility to set up customized interfaces to other applications in order to ensure smooth communication at all times. The software also supports CITRIX and Windows Terminal Services for remote operation‚ where required.

Standard features of SiPass integrated:

  •     Time scheduling
  •     Dynamic graphical status screen
  •     Instructional alarm response windows
  •     Full system archiving and restoration
  •     Advanced reporting tool
  •     Comprehensive audit-trail logging
  •     Advanced alarm management
  •     Anti-passback and roll call
  •     Workgroup anti-passback
  •     Partitioning of operator privileges
  •     Escort control
  •     Door interlocking
  •     Real-time event and message logging
  •     Logon using full password encryption or automatic authentication windows
  •     Automatic and event-triggered reporting
  •     Three wrong PIN modes
  •     Manual system override
  •     Advanced device firmware download
  •     Custom Wiegand
  •     Interoperability with SIMATRIX video surveillance
  •     Interoperability with SISTORE DVRs
  •     Interoperability with Intrunet SI400 series
  •     Support for Siemens RS485 and Clock&Data readers (CerPass protocol)
  •     Support for most popular reader technologies
  •     Networking options for global reach
  •     Upgrade paths for investment protection
  •     21CFR Part 11 compliance

Note: The ASL5000 is a software license only. The SiPass integrated software DVD needs to be ordered separately - see ASB5000-xx.

To order the SiPass integrated software license or any of the SiPass integrated core software‚ you must first complete a software license order form. Please contact your SiPass integrated supplier for further information.

AC5100 - Advanced central controller (ACC)

026_AC5100_c_144x202The AC5100 advanced central controller can be programmed with up to 500‚000 cardholders and up to 96 doors. It has been specially designed for maximum flexibility‚ and provides six separate field level network (FLN) channels. Each FLN is capable of hosting up to 16 local devices for access control‚ monitoring input devices or controlling output devices.    

The ACC also has a diagnostic port that provides a direct connection to its microprocessor to facilitate the download of operating instructions (firmware). Firmware updates can be made without having to visit the controller cabinets. Communication to the host system occurs via a 10/100Mb Ethernet connection. This allows communications over any WAN or LAN where devices on the network can be assigned a unique IP address. This type of communication ensures the fastest possible transaction times between the host system and ACC field panels.  

The ACC hosts a tamper input that can be used to detect if the cabinet in which it has been mounted has been opened. It also provides an alarm output that can operate a visual or audio alarm when security has been breached.

 

 
AC5160 - SiPass integrated controller kit

026_AC5160_c_144x202The AC5160 is an advanced central controller (ACC) and two dual-reader interfaces (DRI) in one enclosure. The components and a power supply are pre-assembled and wired.   

The architecture of the housing and the included accessory kit allows for an easy and quick installation. As all modules are pre-assembled only the connection to the power supply and the readers has to be established. The enclosure includes cable ducts with strain relief to enable easy wiring with external connection points.   

Additional space in the enclosure makes it possible to add extra SiPass integrated components. For example‚ it is possible to add up to four additional DRIs for a total of 12 readers. Depending on the extension an additional power supply might be required. In this case‚ the two power supplies will then operate in master/slave mode. The integrated tamper switch can be used to monitor the opening of the enclosure‚ which can then be configured as an alarm message in SiPass integrated. 

 

AC5200 - ACC-Lite

026_AC5200_c_144x128The AC5200 is a smaller version of Siemens’ high-performance IP-based advanced central controller (ACC). It can manage up to 40‚000 cardholders.    

The ACC-Lite has been specially designed to provide a low-cost alternative for smaller or branch installations. It provides one field level network (FLN) channel which is capable of hosting up to 8 doors for access control‚ monitoring input devices or controlling output devices.      

Firmware can be easily downloaded or updated via TCP/IP connection without having to visit the controller cabinets. Communication with the host system occurs via a two-port Ethernet switch which provides10/100Mb LAN connection. This makes it possible to “daisy chain” controllers. TCP/IP communication ensures the fastest possible transaction times between the host system and the field panels.    

In case of power failure the database on the ACC-Lite is protected in battery-backed memory. This maintains the integrity of the access control data and ensures that the ACC-Lite is back online as soon as power is restored.

ADS5200 - Single reader interface module including base plate

026_ADS5200_c_144x166The ADS5200 provides a Clock&Data/Wiegand interface between a card reader and the advanced central controller (AC5100 or AC5200) for one card reader. When a cardholder presents an access card at an entry or exit reader the ADS5200 reader interface interprets the encoded information and sends this data to the controller. The controller then checks the validity of the cardholder‚ and if the appropriate permissions have been assigned‚ the controller sends a message back to the reader interface allowing it to unlock the door and provide passage. It can also report the status of the door (locked or unlocked) at any time.  

Note: The ADS5200 does not have an RS485 interface for card readers. It supports Clock&Data and Wiegand readers only.

 

 

ADS5210 - Single reader interface module including base plate and plastic housing

026_AC5100_c_144x202The ADS5210 provides a Clock&Data/Wiegand interface between a card reader and the advanced central controller (AC5100 or AC5200) for one card reader. When a cardholder presents the access card at an entry or exit reader the ADS5210 reader interface interprets the encoded information and sends this data to the controller. The controller then checks the validity of the cardholder‚ and if the appropriate permissions have been assigned‚ the controller sends a message back to the reader interface allowing it to unlock the door and provide passage. It can also report the status of the door (locked or unlocked) at any time. 

Note: The ADS5210 does not have an RS485 interface for card readers. It supports Clock&Data and Wiegand readers only.

 

 

 

ADD5100 - Dual reader interface including base plate

026_ADD5100_c_144x185The ADD5100 provides an interface between a card reader and the advanced central controller (AC5100 or AC5200) for up to two card readers. When a cardholder presents an access card at an entry or exit reader the ADD5100 reader interface interprets the encoded information and sends this data to the controller. The controller then checks the validity of the cardholder‚ and if the appropriate permissions have been assigned‚ the controller sends a message back to the reader interface allowing it to unlock the door and provide passage. It can also report the status of the door (locked or unlocked) at any time. The ADD5100 supports Clock&Data, Siemens RS485 and iClass OSDP reader protocols.

 

 

 

 

ADD5110 - Dual reader interface including base plate and plastic housing

026_ADD5110_c_144x202The ADD5110 provides an interface between a card reader and the advanced central controller (AC5100 or AC5200) for up to two card readers. When a cardholder presents the access card at an entry or exit reader the ADD5110 reader interface interprets the encoded information and sends this data to the controller. The controller then checks the validity of the cardholder‚ and if the appropriate permissions have been assigned‚ the controller sends a message back to the reader interface allowing it to unlock the door and provide passage. It can also report the status of the door (locked or unlocked) at any time. The ADD5110 supports Clock&Data, Siemens RS485 and iClass OSDP reader protocols.

 

 

 

 

ADD5160 - Dual reader interface module in weatherproof housing

026_ADD5160_c_144x202The ADD5160 provides an interface between a card reader and the advanced central controller (AC5100 or AC5200) for up to two card readers. When a cardholder presents an access card at an entry or exit reader the ADD5160 reader interface interprets the encoded information and sends this data to the controller. The controller then checks the validity of the cardholder‚ and if the appropriate permissions have been assigned‚ the controller sends a message back to the reader interface allowing it to unlock the door and provide passage. It can also report the status of the door (locked or unlocked) at any time. The ADD5160 supports Clock&Data, Siemens RS485 and iClass OSDP reader protocols.

 

 

 

 

ADD5190 - Dual reader interface including base plate and steel cabinet

026_AKN4200_c_144x201The ADD5190 provides an interface between a card reader and the advanced central controller (AC5100 or AC5200) for up to two card readers. When a cardholder presents the access card at an entry or exit reader the ADD5190 reader interface interprets the encoded information and sends this data to the controller. The controller then checks the validity of the cardholder‚ and if the appropriate permissions have been assigned‚ the controller sends a message back to the reader interface allowing it to unlock the door and provide passage. It can also report the status of the door (locked or unlocked) at any time. The ADD5190 supports Clock&Data, Siemens RS485 and iClass OSDP reader protocols. It is housed in a steel cabinet that contains an integrated tamper switch

 

 

 

 

ADE5300 - Eight-reader interface, including base plate

026_ADE5300_c_144x167The ADE5300 provides a local interface between the advanced central controller (AC5100 or AC5200) and up to 8 card readers. From the ADE5300‚ the information held within the access cards is transmitted to the controller. Each time an access attempt is made the controller verifies the data on the ID card and will then either allow or deny access. The ADE5300 can be configured to control up to 8 doors separately or up to 4 doors that include both entry and exit readers. All variations are possible; for example‚ you can have six single-reader doors and 1 dual-reader door connected to one ADE5300. The ADE5300 supports Wiegand, Siemens RS485 and iClass OSDP reader protocols.

 

 

 

DC12 - Door controller for use with reader(s)

ps_es_ac_entro_door_dc12_144x202The DC12 is designed to monitor and control one door in a SiPass Entro or SiPass integrated system. When BC-Link is used‚ a single DC12 can support two readers and thereby control both entries and exits to a restricted area (anti-passback).

The DC12 includes an integrated status display window to simplify installation and service. It is compatible both with SiPass readers and with most third-party readers that support Wiegand and Clock&Data standards.

 

 

 

 

 

DC22 - Door controller

ps_es_ac_entro_door_dc22_144x202The DC22 is designed to monitor and control one door in a SiPass Entro or SiPass integrated system. When BC-Link is used‚ a single DC22 can support two readers and thereby control both entries and exits to a restricted area (anti-passback).

The DC22 includes an integrated status display window to simplify installation and service. It is compatible both with SiPass readers and with most third-party readers that support Wiegand and Clock&Data standards.

The major difference between the DC12 and the DC22 is that the DC22 has additional inputs/outputs that support advanced alarm control functions‚ e.g. alarm status feedback (ASF). These are essential when integration with an intrusion detection system is required. The DC22 also has two outputs for electric locks (day/night lock) as well as separate inputs for open/closed and unlocked/locked door.

Note: The intrusion, ASF and native motor lock functions of the DC22 are only available in SiPass Entro.

 

 

PD30-EM - Prox Codoor - Scandinavian lock case standard

PD30-EM_144x202PD30-EM is a system Codoor unit that uses EM4102 proximity technology. It contains a reader‚ controller‚ lock mechanism and power supply‚ all in a single housing. Since the PD30-EM is mounted directly onto a standard lock case‚ you do not have to make any cuts in the door other than those required for the cables for power and communication.

PD30-EM is suitable for lock cases with a distance of between 105 mm and 116 mm between the center of the door handle and the center of the lock cylinder. It is designed for use with Scandinavian lock cases.

PD40-EM - Prox Codoor - European lock case standard

PD40-EM_144x202PD40-EM is a system Codoor unit that uses EM4102 proximity technology. It contains a reader‚ controller‚ lock mechanism and power supply‚ all in a single housing. Since the PD40-EM is mounted directly onto a standard European lock case‚ you do not have to make any cuts in the door other than those required for the cables for power and communication.

PD40-EM is suitable for lock cases with a distance of 72 mm between the center of the door handle and the center of the lock cylinder. It is designed for the European standard lock case‚ following the DIN 18251 standard.

 

 

 

 

ATI5100 - Intrusion arming terminal

026_ATI5100_144x_202ATI5100 is a field terminal designed for use with SiPass integrated. It acts as a local interface between an advanced central controller (AC5100 or AC5200) and authorised cardholders‚ enabling them to carry out tasks such as arming and disarming intrusion alarm areas.

 

 

 

 

 


AFI5100 - Input point module including base plate

ps_es_ac_integrated_single_afi5100_144x202.jpgThe AFI5100 is a programmable input controller used as part of a SiPass integrated system. It provides a local interface between the advanced central controller (AC5100 or AC5200) and the devices used to monitor a facility‚ such as infrared detectors. When an input device that is connected to an AFI5100 changes status‚ the AFI5100 registers the status change and forwards this data to the controller. After checking the validity of the data‚ the controller sends the message to the SiPass integrated server‚ so the alarm-handling mechanism can respond appropriately.

 

 

 

AFO5100 - Output point module (16/16) including base plate

ps_es_ac_integrated_single_afo5100_144x202.jpgThe AFO5100 is an advanced‚ multi-purpose module that provides an interface between powered field-level input contact devices (such as elevator buttons) and output devices (such as override mechanisms) to the advanced central controller (AC5100 or AC5200). It is designed for use in elevators that are integrated within an access control environment. A single AFO5100 can provide access control for up to 16 floors and multiple AFO5100 modules can be combined in an elevator system to provide access control for all floors.

The fire override mechanism allows floors to be made automatically accessible during an emergency situation‚ a critical feature for sites where legislation requires strict emergency responses.

 

 
AFO5200 - Output point module (8/8) including base plate

026_ADE5300_c_144x167The AFO5200 is an advanced‚ multi-purpose module that provides an interface between field-level input devices (such as passive infrared detectors) and output devices (such as locking devices) to the advanced central controller (AC5100 or AC5200).

 

 

 

 


IOR6 - IO relay central

ps_es_ac_entro_door_dc22_144x202IOR6 is a general relay central designed for use with SiPass Entro and SiPass integrated. Its four inputs and six outputs can be used for applications such as common alarm outputs‚ fire alarm inputs‚ elevator control‚ machine control or door control (in reservation applications). IOR6 can also be used for timer functions.

Please note in a SiPass Entro system‚ a maximum of 32 IOR6 units can be used for elevator control (for up to 192 floors). For other purposes‚ as many as 512 IOR6 units can be used in a SiPass Entro system; note‚ however‚ that the combined number of doors and IOR6 units connected to a single SiPass Entro system cannot exceed 512.

 

 

 

AK5000-CO - SiPass integrated Cotag Cards Kit

IB1_100_pack_144x202The Cotag Cards Kit includes:

    1‚000 IB958M passive Cotag cards with magnetic stripe

    One Database extension license for 1‚000 cards (ASE5100-BA)

Siemens' Cotag technology is unique on the market in that it can provide both proximity and hands-free card reading in the same system. All Cotag readers can read both active (long-range) and passive (proximity) Cotag cards and tags‚ and both types of cards/tags can be mixed in the same system to provide ultimate convenience and cost-efficiency.

This kit requires a valid SiPass integrated license. To order the SiPass integrated Cotag Card kit‚ you must complete a software license order form. Please contact your SiPass integrated supplier for further details.

 

 

AK5110-CO - SiPass integrated SP500-Cotag Door Kit

026_SiPass_integrated_SP500-Cotag_Door_Kit_144x125The SP500-Cotag Door Kit includes:

    One ADD5100 dual reader interface

    Two SP500-Cotag readers

Siemens' Cotag technology is unique on the market in that it can provide both proximity and hands-free card reading in the same system.


All Cotag readers can read both active (long-range) and passive (proximity) Cotag cards and tags‚ and both types of cards/tags can be mixed in the same system to provide ultimate convenience and cost-efficiency.

 

AK5120-CO - SiPass integrated PR500-Cotag Door Kit

026_SiPass_integrated_PR500-Cotag_Door_Kit_144x171The PR500-Cotag Door Kit includes:

    One ADD5100 dual reader interface

    Two PR500-Cotag readers

Siemens' Cotag technology is unique on the market in that it can provide both proximity and hands-free card reading in the same system.

All Cotag readers can read both active (long-range) and passive (proximity) Cotag cards and tags‚ and both types of cards/tags can be mixed in the same system to provide ultimate convenience and cost-efficiency.

 

SiPass-integrated-demo-caseThe SiPass integrated demo case is designed to demonstrate how SiPass integrated works.

Functions such as triggering of an input via a switch or badging with a card can be easily executed.

The SiPass integrated demo case is an excellent tool for salespeople as it enables customers to quickly gain a hands-on understanding of how the system works. It is very compact and easy to transport from one customer site to another.

 

 

The demo case consists of:

  • SiPass integrated software

  • One AC5100

  • Two ADD5100

  • Four Mifare square readers (with keypads)

  • A RS232-RS485 converter

  • A power supply

  • A cable for AC5100 (RS232)

  • A crossed network cable

  • Ten pre-printed Mifare cards

Note: The demo case is supplied without software. The latest version of the software can be downloaded from Siemens' Customer Support Center. Please contact your SiPass supplier for further information.